ZOMBIE 4x4 BOARD > General :: Build Ups :: > hengls upgrades

hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 10th Aug 08 at 10:09pm
flat bed mod {Grin}
Image
along with that comes few extra ponys

Re: hengls upgrades - Posted By bigbadjeepster (bigbadjeepster) on 11th Aug 08 at 11:09am
sweet, are the fans going to blow down or up?

Re: hengls upgrades - Posted By HOGAN (hogan) on 11th Aug 08 at 3:14pm
Nice! So did you end up with an LT1 or an L98 with the TPI? Just woundering because you were asking about TPI parts and they wont work with the LT1 unless you get special heads. {Wink} And if its TPI is it Mass Air or Speed Density?

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 12th Aug 08 at 12:13am
 
sweet, are the fans going to blow down or up?

down

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 12th Aug 08 at 12:15am
 
Nice! So did you end up with an LT1 or an L98 with the TPI? Just woundering because you were asking about TPI parts and they wont work with the LT1 unless you get special heads. {Wink} And if its TPI is it Mass Air or Speed Density?

93 LT-1 out of formula firebird , find me a computer
also you tell me is it mass air or speed density ? What is better ? why ? cause i'll have the speed part too Smiley

Re: hengls upgrades - Posted By HOGAN (hogan) on 12th Aug 08 at 3:09pm
do you have the wiring harness?

Re: hengls upgrades - Posted By kranker (kranker) on 12th Aug 08 at 3:11pm
lets see some more pics of whats going under the hood :flipoff:

Re: hengls upgrades - Posted By HOGAN (hogan) on 12th Aug 08 at 3:19pm
Hope your ready to do some homework. Your motor was originally speed density and I just threw away a computer that would have worked for your ride.... Enjoy.

Speed Density

Speed Density systems accept input from sensors that measure engine speed (in rpm) and load (manifold vacuum in kPa), then the computer calculates airflow requirements by referring to a much larger (in comparison to an N Alpha system) preprogrammed lookup table, a map of thousands of values that equates to the engine’s volumetric efficiency (VE) under varying conditions of throttle position and engine speed. Engine rpm is provided via a tach signal, while vacuum is transmitted via an intake manifold-mounted Manifold Air Pressure (MAP) sensor. Since air density changes with air temperature, an intake manifold-mounted sensor is also used.


Production-based Speed Density computers also utilize an oxygen (O2) sensor mounted in the exhaust tract. The computer looks at the air/fuel ratio from the O2 sensor and corrects the fuel delivery for any errors. This helps compensate for wear and tear and production variables. Other sensors on a typical Speed Density system usually include an idle-air control motor to help regulate idle speed, a throttle-position sensor that transmits the percentage of throttle opening, a coolant-temperature sensor, and a knock sensor as a final fail-safe that hears detonation so the computer can retard timing as needed.

GM’s Tuned Port Injection (TPI) set-ups used Speed Density metering from 90-92, as did 91-93 LT1 engines. All 86-87 and 88 non-California Ford 5.0L-HO engines used Speed Density metering. Most Mopar fuel- injection systems have used Speed Density too.

Because a Speed Density system still has no sensors that directly measure engine airflow, all the fuel mapping points must be preprogrammed, so any significant change to the engine that alters its VE requires reprogramming the computer.

Mass Flow
By contrast, Mass Air Flow (MAF) systems use a sensor mounted in front of the throttle body that directly measures the amount of air inducted into the engine. The most common type of mass-flow sensor is the hot wire design: Air flows past a heated wire that’s part of a circuit that measures electrical current. Current flowing through the wire heats it to a temperature that is always held above the inlet air temperature by a fixed amount. Air flowing across the wire draws away some of the heat, so an increase in current flow is required to maintain its fixed temperature. The amount of current needed to heat the wire is proportional to the mass of air flowing across the wire. The mass-air meter also includes a temperature sensor that provides a correction for intake air temperature so the output signal is not affected by it.

The MAF sensor’s circuitry converts the current reading into a voltage signal for the computer, which in turn equates the voltage value to mass flow. Typical MAF systems also use additional sensors similar to those found in Speed Density systems. Once the electronic control module (ECM) knows the amount of air entering the engine, it looks at these other sensors to determine the engine’s current state of operation (idle, acceleration, cruise, deceleration, operating temperature, and so on), then refers to an electronic map to find the appropriate air/fuel ratio and select the fuel-injector pulse width required to match the input signals.

GM used MAF sensors on the turbo Buick V-6 Grand National, 85-89 TPI, 94-98 LT1, 96 LT4, and all LS1 engines. Ford has used MAF metering on 88 California 5.0L engines and all 89-and-later V-8 engines.

MAF systems are much more flexible in their ability to compensate for engine changes since they actually measure airflow instead of computing it based on preprogrammed assumptions. They are self-compensating for most reasonable upgrades, as well as extremely accurate under low-speed, part-throttle operation. On the other hand, the MAF meter, mounted as it is ahead of the throttle-body, can become an airflow restriction on high-horsepower engines. On nonstock engine retrofits or EFI conversions on engines never produced with fuel injection, it may be hard to package an MAF meter within the confines of the engine bay and available intake manifolding.


Which Is Best?
In a perfect world, virtually all street-performance engines would use Mass Air, due to its superior accuracy and greater tolerance for engine changes. In the past there was a problem on high-horsepower engines because larger-capacity MAF sensors were scarce and prohibitively expensive. Nowadays, oversize MAF sensors are available from Pro-M, Granatelli Racing, and other sources that are compatible with Ford engines and computers. Custom MAF calibration keyed to the specific vehicle, engine, and injector size is also available. With a correctly calibrated oversize meter, reflashing the Ford computer usually isn’t required. (However, before you run out for a larger Ford MAF meter, Fast Track Performance points out that the first limiting factors are the puny Ford 19 lb/hr injectors, which can only support about 320 hp.)

Some oversize MAF meters have also become available for the second-generation (’94-and-later) GM MAF systems, but the selection isn’t as broad as for the Ford guys. The GM MAF engine management computer isn’t as adaptable as Ford’s. Although it will accept larger MAFs, you can’t go up and down more than one injector size with reflashing the computer.

Bigger MAF meters are not readily available for old GM TPI systems, but Granatelli says it is possible to adapt Ford meters to them via a conversion wiring harness. Custom calibration is required, so Granatelli prefers to do the changeover in-house.

For radical engines or engines never produced with fuel injection, an aftermarket user-programmable computer system is usually preferred. Unfortunately, the more-or-less affordable aftermarket systems—including ACCEL/ DFI, Speed-Pro, and Holley—are Speed Density–based and don’t support Mass Air metering. Those systems that do—including Electromotive, Motec, and Pectel units—are more costly, sometimes considerably so. However, Westech Performance reports that it is possible to use Pro-M’s adjustable Optimizer MAF meter and a stock Ford Mustang computer with Ford’s EPEC piggyback programmable unit to run Mass Air on any engine.

If it is not practical to use MAF on your engine due to packaging or hardware constraints, the programmable Speed Density systems are the next best choice because production-based Speed Density systems won’t tolerate major engine changes without computer reprogramming, which usually requires the services of an outside specialist; if the reprogrammer isn’t specifically familiar with your combo, the end results may be less than satisfactory.

On radical engines (those with cam duration over 240 degrees at 0.050 or less than 10 inches of idle vacuum), even user-programmable Speed Density systems have difficulty due to an erratic or insufficient manifold vacuum signal. If the application is for a race car operated primarily under full throttle, N Alpha is the solution. If you intend to drive on the street, a system that blends N Alpha with Speed Density—varying which is in control per specific operating point and conditions—may be the answer. The higher-end aftermarket systems, including Electromotive’s, support this option.

As electronic engine-management system usage becomes more widespread in the car crafting community, prices and ease of use should become more user-friendly. Already, the latest Gen VII ACCEL/DFI system has the ability to construct its own baseline fuel curve, and the new user programming interface is a full-fledged, Windows-compatible program.

Re: hengls upgrades - Posted By HOGAN (hogan) on 12th Aug 08 at 3:24pm
If worst comes to worst, you can get a aftermarket intake manifold and run a carb.

Re: hengls upgrades - Posted By Sillyneck (sillyneck) on 12th Aug 08 at 7:59pm
hengl has never read that much in all his life compiled. neither have I.

Cliff's Notes:

-You're fucked... shoulda bought another 4.3 {Grin}

Re: hengls upgrades - Posted By HOGAN (hogan) on 12th Aug 08 at 10:01pm
I have a connection on computer programing/chip burning too {Wink}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 12th Aug 08 at 10:20pm
{Shocked} my eyes are sore , what magazine did you get that out of ? sound way too intelegent for you so i got my computer today just waiting on the VATS module . what do you know about that ? and i will be runing mine at Alpha all the time
(that means full throttle rite) {Grin} and all i know is todays special Smoked five O :flipoff:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 12th Aug 08 at 10:23pm
 
lets see some more pics of whats going under the hood :flipoff:

oh nothing , i heard by moving your radiator to the back you gain 100 horsepower :flipoff:

Re: hengls upgrades - Posted By HOGAN (hogan) on 12th Aug 08 at 10:36pm
I had to bypass the vats (vehicle anti theft system) because my 85 Camaro was not equiped with it and the new computer I put in was. I had the guys at speed scene wiring take care of that for me. {Wink}

Re: hengls upgrades - Posted By HOGAN (hogan) on 12th Aug 08 at 10:39pm
Heres what you need to know about N Alpha....

N Alpha
A relatively simple design, N Alpha systems use only engine speed and throttle angle to calculate the amount of fuel needed by the engine. This system doesn’t measure airflow directly; instead, engine load is assumed based on throttle-angle versus engine rpm. The various load-rpm points make up the computer’s lookup table, with the amount of fuel needed at each point manually programmed by the tuner. N Alpha systems work well on engines that operate primarily at wide-open throttle—such as race cars—but are much less accurate at part-throttle than more sophisticated systems because of their relatively simple fuel map. They generally do not have a closed-loop mode for air/fuel correction, resulting in part-throttle calibration that is crude at best when compared to other systems. This also makes them incompatible with modern catalytic converters. Any significant engine change requires remapping.


Re: hengls upgrades - Posted By HOGAN (hogan) on 12th Aug 08 at 10:43pm
So did you get a Speed Density or MAS computer? The harness is diffrent for the two but I'm sure you knew that....

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 13th Aug 08 at 10:37pm
speed density and it will be ran at full throttle , all the time Smiley
Image

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 13th Aug 08 at 10:40pm
okay some more pics kranker
Image



the new upper links clearing oil pan {Rolleyes} {Grin} and sweet panhard angle {Cool}
Image

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 13th Aug 08 at 10:43pm
just gotta finish up wiring , exaust and coolant lines will be ran on friday , cuttin it close {Unsure}
oh ya thanks for all the helpful info Hogan :thumbsup:

Re: hengls upgrades - Posted By Sillyneck (sillyneck) on 14th Aug 08 at 6:43am
wooooooooo near parrallel 4 link w/ inverted panhard? that's gonna be niceeeeeee

Re: hengls upgrades - Posted By bigbadjeepster (bigbadjeepster) on 14th Aug 08 at 8:16am
damn someone must have got a raise! {Grin}

Re: hengls upgrades - Posted By HOGAN (hogan) on 14th Aug 08 at 3:36pm
 
thanks for all the helpful info Hogan :thumbsup:


If I can be of any help let me know.

Re: hengls upgrades - Posted By BigRob (bigrob) on 14th Aug 08 at 6:46pm
 
damn someone must have got a raise! {Grin}
........in his credit score.... :flipoff:

Re: hengls upgrades - Posted By HOGAN (hogan) on 14th Aug 08 at 9:32pm
lol

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 14th Aug 08 at 11:23pm
welp i got some good new , IT RUNS {Grin} how does it run you ask ? Well if you could see a raped ape, you would undersstand . {Cool} it aint now LS1 but the supercharger works great {Cool}

Re: hengls upgrades - Posted By kranker (kranker) on 15th Aug 08 at 9:03am
try to keep this motor together {Grin}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 15th Aug 08 at 3:28pm
 
try to keep this motor together {Grin}

yes i'll try {Wink}

Re: hengls upgrades - Posted By T-CARP (admin) on 15th Aug 08 at 7:59pm
wasn't running when i drove by earlier {Cheesy}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 17th Aug 08 at 6:57pm
oh my friend it was running , just had some other bugs to work out , got it to bleed air last night and replaced defective spark plugs after comp and it burns out now {Grin}
maybe hit up prarie city nextweekend to make sure everything okay :thumbsup:
who wants to race ? {Kiss}

Re: hengls upgrades - Posted By T-CARP (admin) on 17th Aug 08 at 9:38pm
good to hear! did you go compete?

Re: hengls upgrades - Posted By kranker (kranker) on 18th Aug 08 at 10:43am
 
oh my friend it was running , just had some other bugs to work out , got it to bleed air last night and replaced defective spark plugs after comp and it burns out now {Grin}
maybe hit up prarie city nextweekend to make sure everything okay :thumbsup:
who wants to race ? {Kiss}


i do :flipoff:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 19th Aug 08 at 10:29pm
well it ran good but tore back apart to sell cases , ordered 203 to 300 adapter this morning should be here by the end of week Smiley front digs here i come !

Re: hengls upgrades - Posted By bigbadjeepster (bigbadjeepster) on 20th Aug 08 at 2:02pm
now you can show off like I can!

Re: hengls upgrades - Posted By T-CARP (admin) on 20th Aug 08 at 5:27pm
no golden nugget {Rolleyes}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 22nd Aug 08 at 8:46am
no for the same price that i was getting the golden nuget after changing every thing to work in my rig it would have costed the same as a new one and still didn't have a 2 to1 gear for short coarse rock racin {Grin}

i got some other tricks up my sleave but gonna cost more money , 32 spline outputs , LowMax gears and maybe a bilet stak case

Re: hengls upgrades - Posted By bigbadjeepster (bigbadjeepster) on 22nd Aug 08 at 3:08pm
why not just have 2 rigs? Smiley

Re: hengls upgrades - Posted By BigRob (bigrob) on 24th Aug 08 at 7:54am
 
why not just have 2 rigs? Smiley
ya, no shit if anyone could do it it would be hengl...... {Rolleyes}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 26th Aug 08 at 9:25pm
i do have two rigs the week jeep and the toyota



BTW almost done need to make some shifters and modify belly pan {Rolleyes}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 10th Jan 09 at 2:11am
so i slipped with the sawzall while trimming my hood

Image
Image
dogs
Image
Image

Re: hengls upgrades - Posted By bigbadjeepster (bigbadjeepster) on 10th Jan 09 at 7:55am
WoW, I can see the floor now. Did you make a dump run? LoL {Grin}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 10th Jan 09 at 10:39am
in the rig or garage {Cheesy}

Re: hengls upgrades - Posted By BigRob (bigrob) on 10th Jan 09 at 11:48am
Dude you really kicked ass on this thing, Taylor and I were there around 9:45 last night and just the rearend was cut off!!! {Grin} {Shocked} {Shocked} {Shocked}

Re: hengls upgrades - Posted By yeagley (yeagley) on 10th Jan 09 at 10:12pm
{Shocked} Smiley

Re: hengls upgrades - Posted By sarge (sarge) on 11th Jan 09 at 9:25am
 
Dude you really kicked ass on this thing, Taylor and I were there around 9:45 last night and just the rearend was cut off!!! {Grin} {Shocked} {Shocked} {Shocked}
You must be able to sleep through anything being right across the street, by the way looks like you got a new trailer {Confused} cruised by the other day looks like you guy's have been cleaning yard's {Cheesy}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 11th Jan 09 at 9:48am
a torch is silent {Grin}

Re: hengls upgrades - Posted By BigRob (bigrob) on 11th Jan 09 at 9:53am
 
 
Dude you really kicked ass on this thing, Taylor and I were there around 9:45 last night and just the rearend was cut off!!! {Grin} {Shocked} {Shocked} {Shocked}
You must be able to sleep through anything being right across the street, by the way looks like you got a new trailer {Confused} cruised by the other day looks like you guy's have been cleaning yard's {Cheesy}

Yep! You have any steel you wanna get rid of? I still need some material for the deck structure and also some 2 by's for runners. :thumbsup:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 11th Jan 09 at 12:11pm
{Shocked} ff topic:

Re: hengls upgrades - Posted By HOGAN (hogan) on 11th Jan 09 at 12:42pm
whats the plan Jeremy? Looking good in a backwards kind of way. {Grin}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 11th Jan 09 at 2:26pm
new cage , face lift and lypo for the ol girl {Smile}

Re: hengls upgrades - Posted By HOGAN (hogan) on 11th Jan 09 at 5:11pm
Nice look forward to seeing it. You have a Deadline?

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 11th Jan 09 at 8:21pm
no deadline but i'll get some updated pics up

Re: hengls upgrades - Posted By HOGAN (hogan) on 11th Jan 09 at 10:31pm
If you need a hand drinking some beer let me know {Tongue Out} Seriously though, if you need a hand you got my number.

Re: hengls upgrades - Posted By kranker (kranker) on 12th Jan 09 at 4:44pm
it looks like hengl is loosing some weight {Grin}

Re: hengls upgrades - Posted By jiMMythejerk (jimmythejerk) on 12th Jan 09 at 9:14pm
he is just trying to help the ford out. lol

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 12th Jan 09 at 10:21pm
 
he is just trying to help the ford out. lol


{Rolleyes} i don't think so , wanna race with trailers ? :flipoff:

Re: hengls upgrades - Posted By mikeb (mikeb) on 12th Jan 09 at 10:23pm
my moneys on the Dodge

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 12th Jan 09 at 10:31pm
more pics
little more off the sides of the cab and driver side
Image
X behind seats and narrow tub
Image
nice side view of A and B pillars
Image

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 12th Jan 09 at 10:33pm
 
If you need a hand drinking some beer let me know {Tongue Out} Seriously though, if you need a hand you got my number.

10-4 buddy

Re: hengls upgrades - Posted By Alotakids! (alotakids) on 12th Jan 09 at 10:37pm
Fuck that firewall! Cut it all off and tube it out. Ill send you some pics of mine if you need some bending ideas {Grin} Seriously though its more work but youll be way more happy with the end result.

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 12th Jan 09 at 10:45pm
quith thats way to much work and more money witch i don't have , beside my shit STOMPS yours any day of the week

3RD PLACE :flipoff:

Re: hengls upgrades - Posted By Alotakids! (alotakids) on 12th Jan 09 at 10:50pm
Not way more money-way more time. All my shity brackets are handmade. Where is the cost?

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 12th Jan 09 at 10:54pm
 
my moneys on the Dodge

what ? you got smart sold the turd dodge and bought a nice truck , FORD

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 12th Jan 09 at 10:55pm
 
Not way more money-way more time. All my shity brackets are handmade. Where is the cost?

time is money douch bag , besides i could be wheelin

Re: hengls upgrades - Posted By Alotakids! (alotakids) on 12th Jan 09 at 10:56pm
All tubes=way more awesomer!

Re: hengls upgrades - Posted By Alotakids! (alotakids) on 12th Jan 09 at 10:58pm
J/K its good to see you finally cut into that thing.

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 12th Jan 09 at 11:00pm
ya , i wanted to shed alittle weight and be able to see better . not to mention make the rig look better

Re: hengls upgrades - Posted By Alotakids! (alotakids) on 12th Jan 09 at 11:01pm
you still gonna run some sort of cut down toy hood?

Re: hengls upgrades - Posted By jiMMythejerk (jimmythejerk) on 12th Jan 09 at 11:10pm
wow, all along it was blue. lol.

racing - umm yours wet = mine dry. lets boogie.

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 13th Jan 09 at 4:27pm
 


racing - umm yours wet = mine dry. lets boogie.

{Confused} ?? {Unsure} uh what , wow jimmy did you have one too many drinks last night ?

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 13th Jan 09 at 4:28pm
 
you still gonna run some sort of cut down toy hood?
not sure yet , maybe

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 13th Jan 09 at 10:06pm
more progress
boxed in crossmember
Image
before
Image
after
Image
thinking of roof bar/window lines (don't show trout)
Image
i can fill it
Image
maybe more tommrow

Re: hengls upgrades - Posted By HOGAN (hogan) on 13th Jan 09 at 10:42pm
I'm liking it, nice work. Team Hengl bitches!!!!! {Kiss}

Re: hengls upgrades - Posted By BigRob (bigrob) on 13th Jan 09 at 11:00pm
:thumbsup: Smiley damn we will be pimpin this year at Cal-Rocs...lol SWEET!! I didn't even notice when I walked over after work that the rear axle was all smoothed out and truss free!!! Can you say Four Link??... {Grin}

Re: hengls upgrades - Posted By Alotakids! (alotakids) on 15th Jan 09 at 7:41pm
Rob ill totally understand if you dont wanna spot for this thing next season.....Not sure if i have a spotter yet.....Interested?

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 15th Jan 09 at 10:37pm
why would he wanna go from the 1st place team to the third Smiley Smiley :flipoff:

Re: hengls upgrades - Posted By madhobbies (madhobbies) on 16th Jan 09 at 8:35pm
Looks good Hengl :thumbsup:

Re: hengls upgrades - Posted By BigRob (bigrob) on 17th Jan 09 at 9:23am
 
Rob ill totally understand if you dont wanna spot for this thing next season.....Not sure if i have a spotter yet.....Interested?
I would love to, IF I wasn't already spotting for the number ONE driver !!!!! {Grin}

hengl wheres the pic of the finished truss....... = sick :thumbsup:

Re: hengls upgrades - Posted By btilton (btilton) on 17th Jan 09 at 9:03pm
rob. does hengl know you are spotting for derek trent{Confused} ?

Re: hengls upgrades - Posted By BigRob (bigrob) on 18th Jan 09 at 7:59am
 
rob. does hengl know you are spotting for derek trent{Confused} ?
Hahaha.... you fawker Smiley

Re: hengls upgrades - Posted By J-Dub (imuzme) on 18th Jan 09 at 8:37am
Looks sick Jeremy, you amaze me sometimes how fast you get chit done! :thumbsup:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 19th Jan 09 at 9:24am
some more pics
truss
Image
Image
welded to diff . solid {Smile}

Image
caped the sides of the cab
Image
hood and frame prior to hacking
Image
not sure if i like it
Image
Image

Re: hengls upgrades - Posted By yeagley (yeagley) on 19th Jan 09 at 9:34am
Fuck Yeah!!! That is sick Smiley

Re: hengls upgrades - Posted By bigbadjeepster (bigbadjeepster) on 19th Jan 09 at 11:22am
what are you going to do for the bed? looks killer from the front!

Re: hengls upgrades - Posted By T-CARP (admin) on 19th Jan 09 at 9:10pm
I like the front end looks good real tight and smooth!

Re: hengls upgrades - Posted By BigRob (bigrob) on 19th Jan 09 at 10:39pm
The straight bar on te front looks smoother than the kinked , rock it!!

Re: hengls upgrades - Posted By bwhit (bwhit) on 20th Jan 09 at 5:46pm
whats taking so long?
God you take forever!!! :flipoff:

Re: hengls upgrades - Posted By SMATHERS (smathers) on 20th Jan 09 at 7:39pm
lookin sick... Smiley :thumbsup: Smiley

Re: hengls upgrades - Posted By Sillyneck (sillyneck) on 20th Jan 09 at 8:25pm
looks great man! can't wait to see it burnout {Grin} any guess on what kind of diet you just put it on? even more go fast {Cheesy}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 20th Jan 09 at 8:30pm
 
looks great man! can't wait to see it burnout {Grin} any guess on what kind of diet you just put it on? even more go fast {Cheesy}

i'm guesseing atleat 500 pounds lighter not sure how much in tubing i'll be adding but i'll weigh it when done . it was 4560 before so hopefully under 4 would be cool

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 20th Jan 09 at 8:31pm
 
whats taking so long?
God you take forever!!! :flipoff:
































FUCK U {Grin}

Re: hengls upgrades - Posted By jiMMythejerk (jimmythejerk) on 20th Jan 09 at 8:35pm
anything to help out the 6.0hhhh so slow right?

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 20th Jan 09 at 8:36pm
 
anything to help out the 6.0hhhh so slow right?

what ?



5.7 three five oohh you just got your doors blown off
350

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 20th Jan 09 at 8:37pm
 
 


racing - umm yours wet = mine dry. lets boogie.

{Confused} ?? {Unsure} uh what , wow jimmy did you have one too many drinks last night ?

uhh ?

Re: hengls upgrades - Posted By jiMMythejerk (jimmythejerk) on 20th Jan 09 at 8:41pm
wow, okay ill explain.

wet = a full trailer of all fluids and gear
dry = empty, tanks dry

--------------------------

6.0 = ur ford, hence anything to help it out, ie.... shaviving weight on the yota...


{Rolleyes}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 20th Jan 09 at 8:46pm
okay i got it so its trailer talk {Shocked} ff topic: {Rolleyes} incase you didn't relize this is my yota build section {Rolleyes} hahahahaha
my faukin ford 6.0 will spank that dadge any day of the week buddy :flipoff:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 20th Jan 09 at 8:47pm
 
okay i got it so its trailer talk {Shocked} ff topic: {Rolleyes} incase you didn't relize this is my yota build section {Rolleyes} hahahahaha
my faukin ford 6.0 will spank that dadge any day of the week buddy :flipoff:

for god sake lets get the fuck outa dodge and go some were , how bout bodega bay ?

Re: hengls upgrades - Posted By TROUT (fishmouthfabworks) on 20th Jan 09 at 9:44pm
{Shocked} ff topic:

If you are wondering why the Northern California supply of New Castle Brown Ale is dwindling at a rate many cannot fathom.... I think you should make a call to a man named Trout. 218 8236.... he might just have some answers for you.

nice sig line :kranker:

edit- nice front end,reminds me of somthing {Tongue Out}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 20th Jan 09 at 9:53pm
what ? does the front end remind you of ? , haven't seen shit at your shot that looks like that ?
and who changed my sig ?

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 20th Jan 09 at 10:08pm
actually me and brian were already discussing bending the lower tube up to meet the up bit i told him it would resemble my pld cage . , well i guess i could do it and copy yours too , i mean no ones ever gonna see that in use :flipoff:

Re: hengls upgrades - Posted By TROUT (fishmouthfabworks) on 20th Jan 09 at 10:16pm
:flipoff: no they wont,which is why you should have thrown that turd away and bought that one and tossed your shit in it. those tubes were gonna get cut for a skid as well.i need a little mexi child to come scothbrite that sob :flipoff:

hijack off. please continue your regularly schedualed building

Re: hengls upgrades - Posted By BigRob (bigrob) on 21st Jan 09 at 7:32pm
 
:flipoff: .i need a little mexi child to come scothbrite that sob :flipoff:

hijack off. please continue your regularly schedualed building
You always have Tilton... :flipoff:

Re: hengls upgrades - Posted By JBz (jbarrett) on 21st Jan 09 at 11:25pm
tuff as hell, to bad rob shortened his trailer, would have been bad ass to have two rigs on one trailer.

Re: hengls upgrades - Posted By jiMMythejerk (jimmythejerk) on 21st Jan 09 at 11:29pm
then they would need to rent a dodge. blahahahaha

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 22nd Jan 09 at 12:39am
 
then they would need to rent a dodge. blahahahaha

oh {Rolleyes} for gods sake , give it up :flipoff:

Re: hengls upgrades - Posted By jiMMythejerk (jimmythejerk) on 22nd Jan 09 at 11:42am
not untill updates are posted. {Tongue Out}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 22nd Jan 09 at 11:54pm
tommrow , ,i've been busy putting a 5.0 back together for KOH
but i got all my upper rear link tabs built and intalled today {Smile}

Re: hengls upgrades - Posted By matt (matt) on 23rd Jan 09 at 1:42pm
Looks good so far! What are goind to do for a bed in the rear?

Re: hengls upgrades - Posted By btilton (btilton) on 23rd Jan 09 at 7:27pm
 
 
:flipoff: .i need a little mexi child to come scothbrite that sob :flipoff:

hijack off. please continue your regularly schedualed building
You always have Tilton... :flipoff:


he said mexi child... but i think they make more than i do ...wait a minute{Confused}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 24th Jan 09 at 12:51am
alrite here they are
frame splice
Image
fish plate/upper link mounts
Image
boxed in
Image
4 link
Image
bed hoop preview
Image
new antitheft for buggy {Grin}
Image
antithef armed BEEP---BEEEEP
Image
{Cool}
yep, fuck around and find out {Grin} Smiley

Re: hengls upgrades - Posted By JBz (jbarrett) on 24th Jan 09 at 1:37am
fuck yea your rig is lookin tuff as hell! Big rob w/gun = teddy bear......?

Re: hengls upgrades - Posted By Keith (psmurfbeotches) on 24th Jan 09 at 12:26pm
holy axle truss!!!!

Re: hengls upgrades - Posted By bwhit (bwhit) on 24th Jan 09 at 5:58pm
God damn Biggys got the crazy eyes going. That would be a perfect picture for christmas cards! LOL
Looks good Hengle. I like how the back is turning out!

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 25th Jan 09 at 12:02am
 
God damn Biggys got the crazy eyes going. That would be a perfect picture for christmas cards! LOL
Looks good Hengle. I like how the back is turning out!

oh thanks bwite :flipoff:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 26th Jan 09 at 10:01pm
rear shots
Image
Image
Image

Re: hengls upgrades - Posted By jiMMythejerk (jimmythejerk) on 27th Jan 09 at 1:44pm
NICE. what ever you do, DO NOT get rid of the yota steering wheel or the rear drum brakes.

Re: hengls upgrades - Posted By bigbadjeepster (bigbadjeepster) on 27th Jan 09 at 6:41pm
looks killer dude!

Re: hengls upgrades - Posted By BigRob (bigrob) on 28th Jan 09 at 6:30am
drum brakes are a gonner as soon as I get to pick and pull {Grin}

Re: hengls upgrades - Posted By bkizzle (bkizzle) on 28th Jan 09 at 9:18am
fawking sweet dude looks good

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 28th Jan 09 at 9:41am
 
NICE. what ever you do, DO NOT get rid of the yota steering wheel or the rear drum brakes.

{Cry} sorry jimmy we lost the steering wheel last night {Confused}
it was involved in a terrible accident with the hammer , i think alcohol was involved {Rolleyes} don't worry though , its in a better place now Smiley




ITS STILL A TOYOTA

Re: hengls upgrades - Posted By bkizzle (bkizzle) on 28th Jan 09 at 9:46am
 
 
NICE. what ever you do, DO NOT get rid of the yota steering wheel or the rear drum brakes.

{Cry} sorry jimmy we lost the steering wheel last night {Confused}
it was involved in a terrible accident with the hammer , i think alcohol was involved {Rolleyes} don't worry though , its in a better place now Smiley



ITS STILL A TOYOTA


Toyota firewall and floor you mean....Oh and 5 feet of frame rail...But yeah its still a yota, I still like the pics of you loosing a ball joint rock racing Smiley

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 28th Jan 09 at 10:53am
{Grin} thanks

Re: hengls upgrades - Posted By yeagley (yeagley) on 28th Jan 09 at 11:02am
Looking good. Everytime I look at your rig now, it makes me want to cut the 4runner at the bottom of the A pillar and down the sides of the floor. I dont need sheetmetal. Quit giving me ideas bastard :flipoff:

Re: hengls upgrades - Posted By jiMMythejerk (jimmythejerk) on 28th Jan 09 at 11:08am
at least keep the column so you can still use your janatorial keys

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 28th Jan 09 at 1:36pm
sorry jimmy the , i have a push button ignition , the only reason for the keys was for my one tool box

Re: hengls upgrades - Posted By bkizzle (bkizzle) on 28th Jan 09 at 2:02pm
Posted By yeagley on 28th Jan 09 at 11:02am
 
Looking good. Everytime I look at your rig now, it makes me want to cut the 4runner at the bottom of the A pillar and down the sides of the floor. I dont need sheetmetal. Quit giving me ideas bastard :flipoff:


Dont be skurred Cole DO IT!!!!!! Just have hengl over for beers hes good at slippn' with the sawzall

Re: hengls upgrades - Posted By T-CARP (admin) on 28th Jan 09 at 8:45pm
 
 
 
NICE. what ever you do, DO NOT get rid of the yota steering wheel or the rear drum brakes.

{Cry} sorry jimmy we lost the steering wheel last night {Confused}
it was involved in a terrible accident with the hammer , i think alcohol was involved {Rolleyes} don't worry though , its in a better place now Smiley



ITS STILL A TOYOTA


Toyota firewall and floor you mean....Oh and 5 feet of frame rail...But yeah its still a yota, I still like the pics of you loosing a ball joint rock racing Smiley


Ball joint{Confused} ? Smiley That was the top of nuckle brakeing off!!!! His 60 dosen't have ball joints, kingpins :thumbsup:

Re: hengls upgrades - Posted By T-CARP (admin) on 28th Jan 09 at 8:47pm
That thing has about as much japaneese in as you do, I think I probably have more liberty in mine than you have toyota in yours, so from now on my rig will be called a ford liberty! {Rolleyes}

Re: hengls upgrades - Posted By BigRob (bigrob) on 28th Jan 09 at 10:34pm
my chevy is all chevy lol and oh yeah and heavy too!! {Grin}

Re: hengls upgrades - Posted By kranker (kranker) on 29th Jan 09 at 12:39pm
lookn good hengl :thumbsup: i will have to stop by and take a look this weekend :hengl:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 29th Jan 09 at 10:41pm
 
That thing has about as much japaneese in as you do, I think I probably have more liberty in mine than you have toyota in yours, so from now on my rig will be called a ford liberty! {Rolleyes}

it is registered as a Toyota , i will call it an (Aerican Made Toyota {Grin} )
does your rig have liberty frame rails ? NO {Rolleyes}
yours is a trout dog buggy {Wink}

p.s. is this guy smashin him ? :hengl:
i like how how you named it after me {Cool}

Re: hengls upgrades - Posted By T-CARP (admin) on 29th Jan 09 at 11:10pm
no he pulls out a gun it looks better on a white background

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 29th Jan 09 at 11:13pm
oh i thought it might be that but i didn't want to sound stupid if it wasn't , SWEET {Grin}

Re: hengls upgrades - Posted By BMFNTOY (bmfntoy) on 2nd Feb 09 at 4:55pm
Updates??

Re: hengls upgrades - Posted By SMATHERS (smathers) on 4th Feb 09 at 8:29pm
 
Updates??


x2

Re: hengls upgrades - Posted By lil-bronc (lilbronc) on 4th Feb 09 at 11:22pm
Lookin' good.

Are you going to be ready for KOH??


Re: hengls upgrades - Posted By kranker (kranker) on 5th Feb 09 at 4:21pm
 
Lookin' good.

Are you going to be ready for KOH??



hell yeah he will be ready. its team crackhead hengl :laugh:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 5th Feb 09 at 11:30pm
nigga please

i don't think i'm gonna make it to KOH but will hopefully be down there the first weekend of april

pics coming tommrow , ran outof wire {Confused}

Re: hengls upgrades - Posted By DAN FRAN SISCO (thehooskerdeally) on 6th Feb 09 at 12:00am
Hey did you grab that half stick of dom i had at andrew also or just the 2 18 footers?

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 6th Feb 09 at 9:43am
just the two 18 footers ,

Re: hengls upgrades - Posted By BigRob (bigrob) on 6th Feb 09 at 6:41pm
 
Hey did you grab that half stick of dom i had at andrew also or just the 2 18 footers?
{Shocked} ff topic:

Re: hengls upgrades - Posted By Alotakids! (alotakids) on 7th Feb 09 at 8:52pm
Theres plenty of time to get it done before koh, just a few more tubes and tabs to go right?

Re: hengls upgrades - Posted By Alotakids! (alotakids) on 7th Feb 09 at 8:54pm
If not i might be lookin for a paying 50-50 passenger to ride down with me. Sorry Rob off topic. {Confused}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 9th Feb 09 at 1:13pm
some old pics
Image
Image
Image
Image
Image

Re: hengls upgrades - Posted By T-CARP (admin) on 9th Feb 09 at 5:45pm
Looking good!!!!! I like the tach! {Wink}

Re: hengls upgrades - Posted By madhobbies (madhobbies) on 9th Feb 09 at 6:10pm
Looking good! The dash turned out great. Smiley

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 9th Feb 09 at 10:16pm
 
Looking good!!!!! I like the tach! {Wink}

i like it too , thanks {Smile}
thanks jesse , i still got a few finishing touches

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 19th Feb 09 at 10:50pm
made you look {Grin}
okay pics up tommrow , (good ones) stay tuned

Re: hengls upgrades - Posted By bkizzle (bkizzle) on 19th Feb 09 at 11:31pm
I like the old school yota steering wheel....lol When you planning on getting it finished{Confused} its looking good...

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 21st Feb 09 at 12:50am
uh not sure , as soon as possible , i'm jonesen to do some wheelin :scared:

here is some pics
some new bling , no more hub breaky
Image
real U- joiunts (not birfields) :flipoff:
Image
next to an 806 compair
Image
swiss cheased the old battery tray
Image
picked up some Fat Shaft 2.0 air shocks from Tony K , suposed to be super bad ass same shaft a 2.5 in a 2.0 , 18s
upper mounts
Image
lower mounts , oh and disk brakes {Rolleyes}
Image
now thats what up travel looks like boys
Smiley
Image
it don't look so tall with the wheels on it
Image

Re: hengls upgrades - Posted By bigbadjeepster (bigbadjeepster) on 21st Feb 09 at 7:45am
I like the battery tray! Quit giving me ideas.

Re: hengls upgrades - Posted By HOGAN (hogan) on 21st Feb 09 at 9:19am
lookin good Hengl!!!!!

Re: hengls upgrades - Posted By girlfriend (girlfriend) on 22nd Feb 09 at 6:07pm
i like {Grin} keep up the good work :thumbsup:

Re: hengls upgrades - Posted By GOODBY (goodby) on 22nd Feb 09 at 6:41pm
I went by there yesterday and not only can he drive but talk about shaving some weight(hp to weight ratio just got alot better). With the new and improved Toy/Buggy I feel sorry for the sportsman class's at any event. :hengl:

Re: hengls upgrades - Posted By jiMMythejerk (jimmythejerk) on 22nd Feb 09 at 9:46pm
what disk brake bracket/caliper/rotor parts did you use?

Re: hengls upgrades - Posted By kranker (kranker) on 23rd Feb 09 at 9:21am
looks good hengl. Smiley still going for the moster truck look i see {Grin} j/k :booze:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 23rd Feb 09 at 11:13pm
thanks alot guys

Goodby , i can't wait to take our rigs to sand mountain Smiley CHEVY POWER :thumbsup:


jiMMy i used some of Adam Ants caliper brakets , cut off the backing plate flanges , with three quarter ton 44 front rotors and robed the calipers off the front 44 in my back yard {Grin} along with a line lock from tilton , for digs

Re: hengls upgrades - Posted By lil-bronc (lilbronc) on 24th Feb 09 at 8:45pm
Lookin' good.

Any dates you need to get this done by?

P.S. When is the next Lawson Landing Trip?

Re: hengls upgrades - Posted By TROUT (fishmouthfabworks) on 1st Mar 09 at 10:54am
good job buddy :boobs:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 2nd Mar 09 at 8:47am
thanks i 'll throw some newer ones up later

bummer bout that rear wish bone , mother fucker wasn't as strong as your right foot Smiley gave it hell though , good job

Re: hengls upgrades - Posted By BMFNTOY (bmfntoy) on 9th Mar 09 at 8:28am
done yet{Confused} :homo:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 9th Mar 09 at 8:39am
nope got it runnin last night , just got to bleed brakes add coolant then i can do some smokey burn outs past tilmons {Grin} then get and mount seats , cut and mount roof , and some lights , stupid little bull shit

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 16th Mar 09 at 10:58pm
well got the front suspension done , filled the shocks remounted the bumps , with cans so when i get some denero i can slap some air bumps in , been a busy weekend , will get some more pics up tommrow

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 18th Mar 09 at 9:11am
front before
Image
Image
rear with some paint
Image

Re: hengls upgrades - Posted By BMFNTOY (bmfntoy) on 18th Mar 09 at 9:16am
Rig looks like shit should have left it the way it was! :fake:

J/K bro, looks great! :thumbsup: :boobs:

Re: hengls upgrades - Posted By kranker (kranker) on 18th Mar 09 at 9:19am
lets see some pics of the front tube work {Grin} but lookn real nice Smiley

Re: hengls upgrades - Posted By HOGAN (hogan) on 18th Mar 09 at 8:50pm
Great job hengl!!

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 18th Mar 09 at 11:44pm
the front looks alrite i'll slap some pics up tommrow

Re: hengls upgrades - Posted By madhobbies (madhobbies) on 20th Mar 09 at 7:49am
" Put the money in the bag! " :scared: LMAO...... The Chevtoy looks good! :thumbsup:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 21st Mar 09 at 9:19am
you mean 81 toyota , slightly modified

Re: hengls upgrades - Posted By BigRob (bigrob) on 22nd Mar 09 at 7:34am
you mean the" 81' Toyota Grasshopper", Right?

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 24th Mar 09 at 3:49pm
so went out to p.c. sunday with tilmon did a little front dig in the flat dirt and my front drive shaft fell off the t-case Smiley
broken front output time for 32 spline outputs {Rolleyes}

on a good note the shocks feel really really nice i can't believe how nice the handle big dips , bumps and jumps Smiley

can't wait J.V.

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 26th Mar 09 at 11:26pm
added some shit , roof , bed skin , adjustable limit straps, hood ,waiting on inputs , when this reaches 4000 views i will add more pics {Grin}

Re: hengls upgrades - Posted By T-CARP (admin) on 26th Mar 09 at 11:32pm
Just add them or I will make it 4000 views.

Re: hengls upgrades - Posted By T-CARP (admin) on 26th Mar 09 at 11:32pm
ok there! Now wheres the pics? :fake:

Re: hengls upgrades - Posted By madhobbies (madhobbies) on 26th Mar 09 at 11:34pm
4002 views, no pics......LIAR! :flipoff:

Re: hengls upgrades - Posted By kranker (kranker) on 27th Mar 09 at 7:48am
pics please :hengl: :flipoff: i would also like to see how the amps mounted :thumbsup: :booze:

Re: hengls upgrades - Posted By matt (matt) on 27th Mar 09 at 9:32am
Wheres the pics? That turd better be ready for the hammers next week! If you need any help let me know I come over this weekend and help wrench!

Re: hengls upgrades - Posted By BMFNTOY (bmfntoy) on 27th Mar 09 at 8:14pm
Pics or it didn't happen! :homo: :fake:

Re: hengls upgrades - Posted By BigRob (bigrob) on 28th Mar 09 at 7:25am
it looks alright ....... {Rolleyes}




{Grin}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 29th Mar 09 at 12:44am
okay okay you asked
front
Image
Image
rear , with limit straps
Image
limit adjusters
Image
roof , thanks Jesse :thumbsup:
Image
Kranker the speakers finally rock Smiley :kranker: i owe you
Image
some plastic
Image
fuel filler and radiator mount
Image
Kody
Image
Kiarra
Image
got the toyhauler out and washed up
Image
so i have a couple of little bull shit things to finish up , picking up my out puts at UPS on monday morning then i can put t-case back together , belly pan on and load it on the ttrailer Smiley Smiley

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 29th Mar 09 at 12:51am
Image
Image
Image

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 29th Mar 09 at 12:52am
more pics on page 12

Re: hengls upgrades - Posted By jiMMythejerk (jimmythejerk) on 29th Mar 09 at 9:31am
sweet. lookin good. think you savd any weight?

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 29th Mar 09 at 9:48am
not sure mybe alittle , i cut alot off , but added alot
does your rig fit in the toy hauler ?

Re: hengls upgrades - Posted By bkizzle (bkizzle) on 29th Mar 09 at 11:48am
Liking the ajustable limit straps Smiley

Re: hengls upgrades - Posted By btilton (btilton) on 29th Mar 09 at 6:54pm
i cant really get a good look at it. could you pull it out of the garage and take some more pics :flipoff:

Re: hengls upgrades - Posted By bigbadjeepster (bigbadjeepster) on 29th Mar 09 at 7:02pm
:boobs:

Re: hengls upgrades - Posted By kranker (kranker) on 30th Mar 09 at 8:24am
looks good :thumbsup: and you are going to have a stero that you can hear Smiley

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 30th Mar 09 at 1:46pm
 
i cant really get a good look at it. could you pull it out of the garage and take some more pics :flipoff:

i would but i've been busy working on broken wish bone mounts , that guy said he would come over and help , but flaked {Rolleyes}

:fake:

Re: hengls upgrades - Posted By matt (matt) on 31st Mar 09 at 8:28am
Looks good! Time to go test it out at the hammers!

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 31st Mar 09 at 11:13am
yes sir Smiley

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 10th Apr 09 at 10:35am
so hammers went well broke a wussy 1310 32 spline yoke i think cause i gound it too much to get more travel out of it , o-well everything else went good handeled excellent out in the desert and on the rocks
Image
Image
rear limit straps
Image
welded some 1/4" round stock to the sides of the hood for strength
Image
had to straighten my belly pan before hammers
Image
welds to shrink the metal at the dents
Image

Re: hengls upgrades - Posted By TROUT (fishmouthfabworks) on 14th Apr 09 at 10:22pm
cant wait to watch her work out at the comp :thumbsup:

Re: hengls upgrades - Posted By TROUT (fishmouthfabworks) on 14th Apr 09 at 10:23pm
Oh by the way.....you wouldn't have got smoked if you had some fishmouth long tubes :flipoff:

Re: hengls upgrades - Posted By bkizzle (bkizzle) on 14th Apr 09 at 11:24pm
 
Oh by the way.....you wouldn't have got smoked if you had some fishmouth long tubes :flipoff:


ouch salt in the wound..............I think you need the GM hot cam or lt4 cam in that thing have the guy that tuned brians do yours and re run that race, youd figure since hes got a few ponies on you and you have a little torque on him you would have pulled thru but...... maybe that ls1 intake woke up that lq motor{Confused} ? fish tubes wouldnt hurt either....lol dont those lt1's have those rail style manifolds anyway?

Re: hengls upgrades - Posted By BigRob (bigrob) on 15th Apr 09 at 6:30am
the same guy did do both their computers flashing.

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 15th Apr 09 at 9:13am
and thats okay i could go from J.V. to the comp and not turn any wrenches , hes got a laundry list of shit to fix

and its all in the weight stock for stock mine has more power
he just has less weight and i will not sacrafice weight for strength {Grin}

Re: hengls upgrades - Posted By HOGAN (hogan) on 15th Apr 09 at 3:55pm
one word.....DYNO {Wink}

Re: hengls upgrades - Posted By madhobbies (madhobbies) on 15th Apr 09 at 4:08pm
What in the hell does it have to do with a BMX bike? Smiley

Re: hengls upgrades - Posted By BigRob (bigrob) on 15th Apr 09 at 5:43pm
....laundry list.......lol

Re: hengls upgrades - Posted By Alotakids! (alotakids) on 16th Apr 09 at 10:40pm
 
cant wait to watch her work out at the comp :thumbsup:


Ar'nt you gonna be spottin in the pro mod class?

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 19th May 09 at 11:44pm
so my front diff cover and rock ring got pushed into the ring gear at browns valley , so i modified the rock ring
Image

Re: hengls upgrades - Posted By BigRob (bigrob) on 20th May 09 at 6:28am
Nice!! I was wonderin' what you were grinding on last night.... looks good.

Re: hengls upgrades - Posted By bigbadjeepster (bigbadjeepster) on 20th May 09 at 6:55am
super beef! :thumbsup:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 20th May 09 at 10:22am
thanks gotta add the fill plug and some paint today

Re: hengls upgrades - Posted By bigbadjeepster (bigbadjeepster) on 20th May 09 at 4:14pm
hahaha, I just noticed that it was missing.

Re: hengls upgrades - Posted By lil-bronc (lilbronc) on 21st May 09 at 4:26pm
Very Nice.

Where can I order mine?

Re: hengls upgrades - Posted By bkizzle (bkizzle) on 21st May 09 at 7:14pm
so do the top and bottom middle bolts come off at the same time together with the cover.... it looks like your new plate covers them up or is that just the angle of the pic :flipoff:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 26th May 09 at 10:25am
its the angle of the pic {Grin} no the top and bottom bolts come off with cover , when cover comes off the you can get bolts out simply by tilting them were is your fucken cover :fake: and don't show me a toyota housing :flipoff:

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 14th Mar 10 at 3:57am
So the buggy has had a few
minor changes will post some pics of the new panels , I got some suspention mods 4 the front end when I get another garage. I never relized how hard it is to work on your junk in the street or on a trailer let alone finding a place to store it.

Re: hengls upgrades - Posted By HOGAN (hogan) on 14th Mar 10 at 8:52am
I feel your pain!

Re: hengls upgrades - Posted By BigRob (bigrob) on 14th Mar 10 at 9:00am
bring it over, hoser!!

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 17th Nov 10 at 12:25pm
 
So the buggy has had a few
minor changes will post some pics of the new panels , I got some suspention mods 4 the front end when I get another garage. I never relized how hard it is to work on your junk in the street or on a trailer let alone finding a place to store it.


Wow depressing .
So it's been awhile and the rig is in need of a weight transfer more horsepower lower COG and more up travel I would love to build a complete new buggy how ever time is a problem with KOH in a couple months

My goals in stall 6.0 from 2005 siverado aprox. A foot back in the chassis slide both axles forward atleast 6 inches . Redoing links front and rear , would like to sit about 4-6 inches lower with aprox 12 inches or more of uptravel also install sway bar .

Begining deconstructon today stay tuned for pics

Re: hengls upgrades - Posted By lil-bronc (lilbronc) on 17th Nov 10 at 2:28pm
Good luck, I am sure will kick a$$.

Re: hengls upgrades - Posted By HOGAN (hogan) on 17th Nov 10 at 9:00pm
let me know if you need a hand, I'd love to help....... Seriously. {Cool}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 26th Jan 11 at 2:11pm
Image
Image
Image

Re: hengls upgrades - Posted By kranker (kranker) on 26th Jan 11 at 4:46pm
thats all your going to share!!!! i think theres more {Grin}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 26th Jan 11 at 5:28pm
Image
Image
Image

Re: hengls upgrades - Posted By sarge (sarge) on 26th Jan 11 at 6:36pm
looks good enough,,, but you need to paint some frog eyes on the front hooops

Re: hengls upgrades - Posted By kodizzle (kodizzle) on 26th Jan 11 at 6:43pm
Looking wicked bro. Awesome work.

Re: hengls upgrades - Posted By HOGAN (hogan) on 26th Jan 11 at 11:20pm
Bad ass Hengl!!!!

Re: hengls upgrades - Posted By kranker (kranker) on 27th Jan 11 at 9:30am
Dam you work fast {Grin} j/k looks good hengl. it even looks better in person. Smiley

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 27th Jan 11 at 9:34am
Ya not fast enough dam it I'm fucken burnt out thanks for the complements tho

Re: hengls upgrades - Posted By BigRob (bigrob) on 31st Jan 11 at 6:32am
way to go bro! the rig is def. ready to be a contender in the heavy weight fight known as KOH!!! {Grin}

Re: hengls upgrades - Posted By jeremyhengl (jeremyhengl) on 4th Apr 12 at 12:38pm
So I guess I could add some updates . The rig got another revamp before KOH this year I totally reworked the back of the chassis made some new shock mounts and bypass mounted to the lower links (trailing arm style) I hate when people loosely thow around the name trailing arms mine are just round tube with some shock mounts ask trout for a pic of trailing arms. I removed the rear bulkhead and installed a fat tool box . All and all the buggy looks the same . I'll get up some more recent pics